This Makita LXT 18V 5.0Ah 8pc Job-site Kit includes:

• 1 x DGA504 Cordless Brushless Angle Grinder

• 1 x DJR187 Cordless Brushless Reciprocating Saw

• 1 x DHP486 Cordless Brushless Hammer Drill

• 1 x DTW300 Cordless Brushless Impact Wrench

• 1 x DTD171 Cordless Brushless 4-Stage Impact Driver

• 1 x DHR242 Cordless Brushless Combination Hammer

• 1 x DHS660 Cordless Brushless Circular Saw

• 1 x DTM51 Cordless Brushless Multi Tool

Included accessories 3 x 5.0Ah batteries (BL1850B), Rapid Dual Charger (DC18RD), Tool Bag (199936-9)

The Powertool Centre is an authorised dealer of Makita tools.

All products come with a full New Zealand manufacturers warranty.

• Auto-start Wireless System(AWS) for on demand dust extraction

• Brushless motor delivers up to 205W of suction power

• Powerful 23kPa max sealed suction performance

• 15L dust capacity with HEPA filter for 99.97% filtration

• Variable suction control dial for optimum suction and runtime

• 12 Position pivoting flashlight head swivels from 0º - 170º degrees

• 54hrs of continous illumination/runtime on a 6.0Ah battery

• 4x 0.5W LEDs provide brightness of 160 lumens

• Compact and ergonomic design at only 272mm long

Maximum cutting capacity of 56mm with a -1° to 48° bevel capacity

• Automatic torque drive increases torque to power through any cut

• Smooth cutting performance with up to 6,300rpm no load speed

• Variable speed with soft start and electric brake

• Auto-start Wireless System (AWS) for on demand dust extraction

• note: AWS Chip not included 198901-5

Dust Extraction adaptor keeps the jobsite clean as you work

• 3-Mode operation: for both drilling and chipping in masonry material

• 2.0J of impact energy for efficient drilling of masonry

• Unique rubber joint suppresses vibration to battery

Max cut capacity of 57mm with up to 50° bevel capacity

• Automatic Torque Drive increases torque to power through any cut

• High cutting performance with up to 5,000rpm no load speed

• Electric brake rapidly slows the blade for added safety

• Blower function blows dust away from cut line for greater visibility

Kickback detection, anti-restart and soft start

Automatic Torque Drive increases torque to power through any cut

Extreme performance with 8,500rpm no load speed

XPT technology that protects against dust & moisture

Electronic current limiter

High powered motor allows maximum 3mm cutting depth

Auto-start Wireless System (AWS) for on demand dust extraction*

12,000rpm no load speed with Automatic Torque Drive performance

Left or right side chip ejection

Electric brake & foot on base plate protect workpiece from damage

Compact design for comfortable handling at only 170mm in length

4 Stage power selection for optimum rpm and fastening torque

Maximum nut busting torque of 1,000Nm with 700Nm max. fastening -, Hard: 320Nm, Med: 200Nm, Soft: 150Nm

Unique rubber joint suppress vibration to battery terminals

Forward & reverse auto stop function, optimised for fastening applications

Durable aluminium gear housing

Mechanical 2 speed gearing with all metal gear construction

High powered Brushless Motor produces 141Nm peak torque

XPT technology that protects against dust & moisture

Twin LED Job light with after-glow function

• Push button control with on/off and high/medium/low speeds

• Compact design with lower centre of gravity for easier handling

• High orbital speed up to 11,000opm with 2.8mm orbit diameter

• Pad brake prevents aggressive sanding on first contact

• Hook & loop paper fastening system

• Tool-less accessory changes with lever locking system

• Compatible with STARLOCK/ StarlockMax

• Variable speed dial 10,000 - 20,000 OPM no load speed for versatile performance

• 12 angle settings of accessories at every 30° from 0° to 360°

• 2.5m/s² or less of vibration thanks to AVT (Anti-Vibration Technology)

• Small and easy to grip 169mm diametre barrel grip for comfortable and improved handling

• Easily converts blower to suction tool

• 3 stage air volume settings & variable speed trigger

• Max. air velocity of 352.8km/h & max. air volume of 3.2m³/min

• Lightweight at only 2.1kg with battery

• Up to 2 hours runtime with 5.0Ah battery

• also available in Olive green as part of the Lifestyle range

• 13mm stroke with a cutting capacity of 50mm in wood

• Two switch levers; trigger switch and paddle switch

• Faster cutting 3,000spm no load speed

• Low vibration at only 7.0m/s

Tool-less accessory clamp for quick installation and replacement

• 12 angle setting of accessories at every 30°from 0°to 360°

• Variable speed control by dial

• Battery capacity warning lamp

• Anti-restart function prevents accidental start-up

• Accepts OIS - Makita & Bosch accessories

High capacity performance with up to 2mm cutting depth

Improved fan design enhances chip ejection

Powerful 14,000rpm motor delivers high cutting performance

Electric brake for fast stopping of blades

Foot on base protects work piece from scratches and damages

• Tool-less blade change for quick and convenient blade changes

• Variable speed control by trigger for more accurate cutting

• 26mm stroke length at 2,600rpm for rapid cutting

• Blower function blows saw dust off the cutting line

• 3 orbital cut settings & straight cutting to suit each specific application

32mm stroke with a cutting capacity of 255mm in wood

Newly designed vertical crank mechanism reduces vibration

High performance 3,000spm no load speed

Rafter hanging hook for added convenience

XPT technology that protects against dust & moisture

Max cut capacity of 57mm with up to 50° bevel capacity

Automatic Torque Drive increases torque to power through any cut

High cutting performance with up to 5,000rpm no load speed

Electric brake for added safety

Twin LED job light

Electronic brake, anti-restart and soft start

Automatic Torque Drive increases torque to power through any cut

Extreme performance with 8,500rpm no load speed

Kick back detection - shuts tool off if jamming occurs

Battery protection circuit

Electronic current limiter

• Maximum air velocity up to 150m/s wind speeds

• 4 stage electronic speed control to suit a variety of applications

• Continuous runtime up to 55mins on low with optional 6.0Ah

• Tool-less nozzle change with nozzles available for a variety of applications

• Includes 3/8 and 1/4" socket adaptors

• Can be used as a hand ratchet wrench

• 800rpm producing up to 47.5Nm max fastening torque

• Ability to tighten 13mm nut by removing socket adaptor

• Ergonomic design and Ultra-lightweight at just 0.86kg skin

• Maximum blade capacity of 165mm

• 2 settings to optimise viscosity for paint or mortar

• Powerful brushless motor delivers 0-300 or 0-1,300rpm no load speed

• Protective covers to shield the unit, switch and battery from splashes

• XPT technology protects against dust and moisture

• 20mm max cut capacity with 6 pre-set cutting depths

• Angle adjustable fence lockable in any position between 0 and 90

• 6,500rpm no load speed delivers high performance cutting

• Electronic current limiter for overload protection

• Anti-restart function with warning lamp for safety

• Connects directly to Makita extractors VC2510/VC3210

• High durability aluminium housing for stable cutting up to 66mm

• Constant speed control, blade speed remains constant under heavy load

• Brushless motor provides 192m/min blade speed for rapid cutting speeds

• Variable speed via trigger and dial for controlled cutting in various materials

• Adjustable stopper plate for cutting close to walls and ceilings

• 6,400 Ties per charge

• 120 Tiers per Wire Reel

• Ties up to 2 x D16 Rebars

• Tying speed of 0.8 Seconds per tie

• 6 Stages to match various tension strength

• XPT technology that protects against dust & moisture

• For optimal performance use Makita wire cartridges

• Temperature control dial with a maximum temperature of 550°C

• 2 stage Air volume settings, High producing 200L/min and low 120L/min

• Lock on trigger switch for easy hands-free operation

• Quick release nozzles, eject hot nozzles without the need to handle hot parts

• Standard nozzles: Glass Protection, Wide Slot, Reflector, and Reduction Nozzles

• Dual mode: random orbit with forced rotation/ random orbit

• Elastomer bumper on gear housing for work piece protection

• Brushless motor provides 0-6,800opm with a 5.5mm orbit diameter

• Variable speed control via trigger and pre-set dial

• Constant speed control and soft start for smooth operation

• 26mm stroke with a cutting capacity of 135mm in wood

• Soft No-Load improves your control & battery life

• 800 - 3,500spm no load speed

• Variable speed control via dial

• Tool-less blade change for quick and convenient blade changes

• Compact and lightweight design at only 434mm in length and 2.9kg skin weight

• Mechanical 2 speed gear box able to drill up to 65mm self feed bits in low speed

• High power brushless motor produces 70Nm max torque in low speed

• High durability 13mm keyed chuck for secure bit retention

• XPT technology that provides increased protection against dust & moisture

• 4-pole motor delivering high power

• Compact 66mm head height

• High performance 1,800rpm no load speed

• Heavy duty keyed chuck design

• Paddle Switch

• Automatic pressure switching function maintains steady flow rate regardless of pressure on Mode 2

• 1,200mm flexible hose length for access to hard to reach places

• Maximum 10,000psi discharge pressure and 295mL/min discharge rate

• Variable speed trigger for control over grease flow rate

• LED job light with manual on and off switch

**Compatible grease Type: NLGI: No.0- No.2

• Convenient trigger operable from two directions

• Flexshaft length 1,200mm

• 12,500 vibrations per minute

• Increased convenience with new trigger operable from two directions

• Battery protection cover

• 161psi maximum air pressure for inflating a wide variety of equipment

• Large digital backlit display, shows current and target air pressure

• Decompression function for reducing the current air pressure

• High discharge volume at 22L/min for fast inflation times

• Auto-stop function, inflator shuts down once target pressure is achieved

*Duty cycle 10 minutes ON/ 5 minutes OFF

• Variable Speed Control Dial (3,000 - 8,500rpm) Enables User to Match the Speed to the Application

• Electronic brake, kickback detection, anti-restart and soft start

• Automatic Torque Drive increases torque to power through any cut

• XPT technology that protects against dust & moisture

• Auto-start Wireless System (AWS) for on demand dust extraction

• Kickback detection, anti-restart and soft start

• Automatic Torque Drive increases torque to power through any cut

• Extreme variable speed performance of 3,000 - 8,500rpm no load speed

• XPT technology that protects against dust & moisture

• Auto-start Wireless System (AWS) for on demand dust extraction

• Variable speed control trigger

• Excellent manoeuvrability acheived by the well balance design, allows for easy overhead application

• Base cover protects material from damage

• Dust box is designed to catch dust in overhead application or be connected to dust extraction

• LED joblight

• 150mm TCT saw blade delivering 57.5mm cutting depth

• Self-Dust collecting housing reduces scatter of metal chips

• High performance cutting with 4,100rpm no load speed

• Automatic Torque Drive increases torque to power through any cut

• Electric brake for fast yet gentle stopping of blade rotation

• 136mm TCT saw blade delivering 50.5mm cutting depth

• Self-Dust collecting housing reduces scatter of metal chips

• Makita-built motor delivers 3,600rpm

• Electric brake for fast yet gentle stopping of blade rotation

• LED job light

• 1/4" hex bit receptacle

• Compact angle head for easy access in tight places

• The head height of 53mm (2-1/16") ensures easy access to screws in tight places

• Conveniently located reverse switch

• Ergonomically designed handle with rubberized soft grip provides more control and comfort

• LED job light with afterglow function

• Unique rubber joint suppress vibration to battery terminals

• 3 Stage power selection for optimum rpm and fastening torque

• Most powerful in its class with 1,700Nm of nut busting torque

• Twin LED job light with pre glow and after glow function

• Durable hammer case for maximum reliability

• One-handed compact and lightweight design

• 22mm stroke with a cutting capacity of 255mm in wood

• Faster cutting 3,100spm no load speed

• Two switch levers; trigger switch and paddle switch

• XPT technology that protects against dust and moisture

• Large capacity of 80mm for polishing and 50mm for sanding

• Compact design for comfortable use in narrow work spaces

• XPT technology enhanced protection against dust & moisture

• 2 speed selection Polishing: 0 - 2800 and Sanding: 0 - 9500

• Elastomer bumper on gear housing for work piece protection

• Capable of detecting a variety embedded objects such as; metal, wood, plastic and shielded electrical wire up to 180mm deep

• Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or plaster board) and hollow block

• Simplified user interface displays center, edge position, relative width and depth of embedded objects

• Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally

• Dust and water resistance with IP54 rating for increased durability

• Sub-Compact design ideal for working in tight spaces and overhead applications

• Vibration absorbing handle moves independently of the motor for increased operator comfort

• Brushless motor delivers 1.2J* of impact energy with a maximum 17mm hole capacity

• 2-Mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications

• Weighs only 2.4kg with battery (battery not included) for reduced operator fatigue 

*Rating in accordance with EPTA 05/2009

• 4-Pole motor with dual steel bearings delivering high power

• High durability clutch with direct drive transmission

• 4,000rpm no load speed motor delivers fast driving performance

• Tool-less stopper base adjustment

• Electronic 3 stage speed adjustment for a flawless finish

• 2.0mm orbit diameter for efficient removal of work piece material

• Efficient 200W* motor provides 12,000opm/24,000spm no load speed

• 185 x 92mm pad size with spring loaded paper clamp

• Ergonomic grip design for comfortable use single or double handed

• Two speed settings (11,000/ 14,000 OPM) engineered for a flawless finish

• Ergonomic palm rest grip design for comfortable handling

• 1.5mm orbit diametre for efficient removal of work piece material

• Large clamping lever for quick and easy paper installation

• Dust Box provides efficient through-the-pad dust collection for a cleaner work environment

• Water supply attachment for clean cuts up to 40mm deep

• Automatic Torque Drive increases torque to power through any cut

• Auto-start Wireless System (AWS) compatible*

• XPT technology that protects against dust & moisture

• Electric brake for rapid stopping of blade rotation

*Requires optional wireless transmitter

• Rigid aluminium hammer case

• One touch bit installation

• 170Nm of max fastening torque

• XPT technology that protects against dust & moisture

• Variable speed trigger

• Durable aluminium gear housing

• Mechanical 2 speed gearing with all metal gear construction

• 60Nm Max lock torque

• XPT technology that protects against dust & moisture

• Twin LED Job light with after-glow function

On/off switch with safety lock and variable speed, Aluminium base with accurate rack and pinion depth

adjustment  10,000 - 30,000rpm no load speed for a clean professional finish, LED job light for improved

visibility,     Up to 100 Metres of trimming using 6.0Ah Battery* (Trimming 6mm at 4mm deep)

Variable speed trigger & Quick Trigger mode which engages immediate full speed

Forward & Reverse Automatic Stop, with 6 modes for customised applications

High power in a compact design with 330Nm maximum fastening torque

4 stages of impact force enables the user to set the appropriate torque for each application

eXtreme Protection Technology (XPT) provides enhanced protection against dust and moisture

4 stage impact selection plus two T-modes, A-mode and bolt mode

On the go single hand impact selection button

Impressive 180Nm of max. fastening torque

XPT technology enhances dust and moisture protection

Ultra compact design with twin dual side LEDs

Large cut capacity up to 46 x 92mm

46° left and right bevel, 52° left and right mitre

High cutting performance with up to 5,000rpm no load speed

Automatic Torque Drive increases torque to power through any cut

Laser function with LED job light

Unique rubber joint suppress vibration to battery terminals

3 Stage power selection for optimum rpm and fastening torque

Most powerful in its class with 1,600Nm of nut busting torque

Twin LED job light with pre glow and after glow function

Durable hammer case for maximum reliability

Specifications

• Capacities

• 12.7mm -1/2" Square drive- Standard bolt M12-M30- High tensile bolt M10-M24

• Max fastening torque 1,000Nm

• Nut-Busting torque1,600Nm

• Impacts per minute - Hi 0-2,200ipm- Med 0-2,000ipm- Lo 0-1,800ipm

• No Load Speed - Hi0-1,800rpm- Med0-1,000rpm- Lo0-900rpm

• Overall dimensions 229mm

• Net weight3.7kg

• Voltage18VLXT

• Battery compatibility1.5Ah 3Ah 4Ah 5Ah 6Ah

360° rotating die holder

Simple lock on switch

Easy grip motor housing

Low battery warning light

Anti-restart function

Included accessories

Wrenches, punch & die.

• 2 Stage power selection for optimum suction performance

• Approved for dust class L of EC regulation

• 7.5L Tank capacity with HEPA filter

• 6.7kPa Max sealed air suction

• Compact and lightweight at 4.6kg with battery

• Up to 35 minutes runtime on high power selection

• Cuts up to 13mm (1/2") cement fiber siding

• 360° swivel shear head for increased cutting convenience

• Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting

• Compact and ergonomic design at only 379mm long

• 3 forward and 3 reverse Auto-Stop modes for increased efficiency

• 4 Stage power selection for optimum rpm and fastening torque

• 330 N·m of Max Torque and 580 N·m of Nut-Busting Torque

• XPT technology that protects against dust & moisture

• LED Job light with pre-glow and after-glow functions

• Compact and ergonomic design at only 144mm long

3 mode - Rotation, Hammering & Rotation with Hammering

9.0m/s² of vibration thanks to AVT (Anti-Vibration Technology)

High performance thanks to 2.8J* of impact energy

One-touch sliding chuck

XPT technology that protects against dust & moisture

Belt arm pivots 160° for comfortable use in a variety of applications

Variable speed dial adjusts belt speed for sanding various materials

Brushless motor provides 1,700rpm for efficient material removal

Adjustable LED light angle to match the belt arm direction

Electric belt brake rapidly stops belt once trigger is released

9mm Standard belt, (6mm, 13mm Optional Accessories)

Variable speed control by trigger and dial

Anti-drip function stops excess sealant from oozing out

0-28mm per second no load pushing speed

ZB - Includes 600mL holder, piston & ram only

ZX - Includes both 300mL and 600mL holders, pistons and rams

Large cut capacity up to 52 x 300mm

• 45° left and 5° right bevel, 47° left and 57° right mitre

• 5,700rpm no load speed with Automatic Torque Drive performance

• Double sliding mechanism for smoothest possible cutting action

• Electric brake & side rails for added safety

Specifications

Blade diameter190mm

Overall dimensions 655mm

Net weight 13.1kg

Voltage 36V LXT

Battery compatibility 1.5Ah 3Ah 4Ah 5Ah