No need for compressors, generators, cords, and air hoses! HiKOKI’s MULTI VOLT™ 36V 3/4″ High Torque Brushless Impact Wrench delivers 1,800Nm of Nut-busting Torque and features like 4-stage tightening mode selector, Variable Speed Control and IP56 Dust and Water Protection. This model is powered by MULTI VOLT™ Batteries Batteries and chargers sold separately.

INCLUDES:

GSB18 V-EC BB Brushless Hammer Drill

GWS18-125 v-li BB Angle Grinder

2 x 5ah 18v Lithium Ion Batteries

1 x AL1860 cv Charger

2 x L_Boxx Samll 136

• Patented Metabo handle system with additional switch for up to 50% more reach and range

• Low weight avoids fatigue when working

• Patented mechanical quick blade stop (in 0.05 seconds) for improved safety

• Blades with special geometry generate less wear and thus deliver 200% longer service life

• Clean cut thanks to diamond-ground blade teeth on both sides at a30° angle

• Lower safety blade for high safety at work

• Metabo S-automatic safety clutch: Protects blades and gears when debris or large branches stop the blades

• Fatigue-proof operation due to ergonomic full grip bow-type handle design and optimum centre of gravity position

• Very quiet running due to shear blades running in opposite direction

• User-friendly guidance of machine exhaust in all working situations

• Easy servicing thanks to cable replacement cover

• Cable strain relief prevents the unintentional disconnection of the plug-in connection

• Trigger guard with twig feed protects user and gear from kickbacks

• Brushless hammer drill with maximum power for demanding applications

• Hammer drill function for drilling in masonry

• Metabo Quick System: quick change of bit retainer and bits, for flexible working

• Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces

• Precision Stop: electronic torque control with increased precision for precise, delicate working

• Overload protection: protects the motor from overheating

• Electronic safety shutdown: no kickback if the drill bit stops unexpectedly - for high user safety

• Integrated LED work light with night light function for optimal brightness in the work area

• With handy belt hook and bit case which can be fixed either on the right or left side

• Many brands, one battery pack system: This product can be combined with all 18V battery packs and chargers of the CAS brands: www.cordless-alliance-systems.com

Large cut capacity up to 52 x 300mm

• 45° left and 5° right bevel, 47° left and 57° right mitre

• 5,700rpm no load speed with Automatic Torque Drive performance

• Double sliding mechanism for smoothest possible cutting action

• Electric brake & side rails for added safety

Specifications

Blade diameter190mm

Overall dimensions 655mm

Net weight 13.1kg

Voltage 36V LXT

Battery compatibility 1.5Ah 3Ah 4Ah 5Ah

Maximum cutting capacity of 56mm with a -1° to 48° bevel capacity

• Automatic torque drive increases torque to power through any cut

• Smooth cutting performance with up to 6,300rpm no load speed

• Variable speed with soft start and electric brake

• Auto-start Wireless System (AWS) for on demand dust extraction

• note: AWS Chip not included 198901-5

Tool-less accessory clamp for quick installation and replacement

• 12 angle setting of accessories at every 30°from 0°to 360°

• Variable speed control by dial

• Battery capacity warning lamp

• Anti-restart function prevents accidental start-up

• Accepts OIS - Makita & Bosch accessories

Dust Extraction adaptor keeps the jobsite clean as you work

• 3-Mode operation: for both drilling and chipping in masonry material

• 2.0J of impact energy for efficient drilling of masonry

• Unique rubber joint suppresses vibration to battery

Max cut capacity of 57mm with up to 50° bevel capacity

• Automatic Torque Drive increases torque to power through any cut

• High cutting performance with up to 5,000rpm no load speed

• Electric brake rapidly slows the blade for added safety

• Blower function blows dust away from cut line for greater visibility

Max cut capacity of 57mm with up to 50° bevel capacity

Automatic Torque Drive increases torque to power through any cut

High cutting performance with up to 5,000rpm no load speed

Electric brake for added safety

Twin LED job light

32mm stroke with a cutting capacity of 255mm in wood

Newly designed vertical crank mechanism reduces vibration

High performance 3,000spm no load speed

Rafter hanging hook for added convenience

XPT technology that protects against dust & moisture

360° rotating die holder

Simple lock on switch

Easy grip motor housing

Low battery warning light

Anti-restart function

Included accessories

Wrenches, punch & die.

Unique rubber joint suppress vibration to battery terminals

3 Stage power selection for optimum rpm and fastening torque

Most powerful in its class with 1,600Nm of nut busting torque

Twin LED job light with pre glow and after glow function

Durable hammer case for maximum reliability

Specifications

• Capacities

• 12.7mm -1/2" Square drive- Standard bolt M12-M30- High tensile bolt M10-M24

• Max fastening torque 1,000Nm

• Nut-Busting torque1,600Nm

• Impacts per minute - Hi 0-2,200ipm- Med 0-2,000ipm- Lo 0-1,800ipm

• No Load Speed - Hi0-1,800rpm- Med0-1,000rpm- Lo0-900rpm

• Overall dimensions 229mm

• Net weight3.7kg

• Voltage18VLXT

• Battery compatibility1.5Ah 3Ah 4Ah 5Ah 6Ah

Audio Modes: Bluetooth, AM & FM radio frequencies

Group chain allows you to link up to 10 speakers for ultimate wireless sound*

High quality sound produced by 2 stereo speakers and subwoofer

Powered by 40Vmax, 18V, 12Vmax or AC power

Durable design with an IP65 rating protection against dust & water

*Only on applicable models with this feature

*Battery cover does not close when using 40Vmax 5.0Ah and larger capacity batteries

• also available in Olive green as part of the Lifestyle range

Large cut capacity up to 46 x 92mm

46° left and right bevel, 52° left and right mitre

High cutting performance with up to 5,000rpm no load speed

Automatic Torque Drive increases torque to power through any cut

Laser function with LED job light

4 stage impact selection plus two T-modes, A-mode and bolt mode

On the go single hand impact selection button

Impressive 180Nm of max. fastening torque

XPT technology enhances dust and moisture protection

Ultra compact design with twin dual side LEDs

Kickback detection, anti-restart and soft start

Automatic Torque Drive increases torque to power through any cut

Extreme performance with 8,500rpm no load speed

XPT technology that protects against dust & moisture

Electronic current limiter

High capacity performance with up to 2mm cutting depth

Improved fan design enhances chip ejection

Powerful 14,000rpm motor delivers high cutting performance

Electric brake for fast stopping of blades

Foot on base protects work piece from scratches and damages

High powered motor allows maximum 3mm cutting depth

Auto-start Wireless System (AWS) for on demand dust extraction*

12,000rpm no load speed with Automatic Torque Drive performance

Left or right side chip ejection

Electric brake & foot on base plate protect workpiece from damage

Variable speed control by trigger and dial

Anti-drip function stops excess sealant from oozing out

0-28mm per second no load pushing speed

ZB - Includes 600mL holder, piston & ram only

ZX - Includes both 300mL and 600mL holders, pistons and rams

Variable speed trigger & Quick Trigger mode which engages immediate full speed

Forward & Reverse Automatic Stop, with 6 modes for customised applications

High power in a compact design with 330Nm maximum fastening torque

4 stages of impact force enables the user to set the appropriate torque for each application

eXtreme Protection Technology (XPT) provides enhanced protection against dust and moisture

Compact design for comfortable handling at only 170mm in length

4 Stage power selection for optimum rpm and fastening torque

Maximum nut busting torque of 1,000Nm with 700Nm max. fastening -, Hard: 320Nm, Med: 200Nm, Soft: 150Nm

Unique rubber joint suppress vibration to battery terminals

Forward & reverse auto stop function, optimised for fastening applications

On/off switch with safety lock and variable speed, Aluminium base with accurate rack and pinion depth

adjustment  10,000 - 30,000rpm no load speed for a clean professional finish, LED job light for improved

visibility,     Up to 100 Metres of trimming using 6.0Ah Battery* (Trimming 6mm at 4mm deep)

Belt arm pivots 160° for comfortable use in a variety of applications

Variable speed dial adjusts belt speed for sanding various materials

Brushless motor provides 1,700rpm for efficient material removal

Adjustable LED light angle to match the belt arm direction

Electric belt brake rapidly stops belt once trigger is released

9mm Standard belt, (6mm, 13mm Optional Accessories)

Durable aluminium gear housing

Mechanical 2 speed gearing with all metal gear construction

High powered Brushless Motor produces 141Nm peak torque

XPT technology that protects against dust & moisture

Twin LED Job light with after-glow function

The M18 FUEL 38mm Magnetic Drill drills faster, delivers the strongest magnetic hold on 6mm steel providing a safer drilling environment in this material, and drills over (40) 20mm holes per charge.The M18 FUEL 38mm Magnetic Drill delivers safer drilling on 6mm steel by providing the industry’s strongest holding force on this material. By utilising permanent magnets, the magnetic base operates without electricity; ensuring that the magnet does not deactivate if the battery is drained. Equipped with Auto-Stop lift-off detection, power to the motor is automatically cut if excess rotational motion is detected while drilling. Powered by a MILWAUKEE POWERSTATE Brushless Motor, both drills are faster than their corded counterparts, and deliver the same 38mm annular cutter capacity. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM-ION 5.0Ah batteries provide over (40) 20mm holes in 6mm steel, while delivering the most durable pack construction on the market, and maximum recharges.

Our M18 FUEL™ Laminate Trimmer combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The Laminate Trimmer leverages our POWERSTATE Brushless Motor and REDLINK™ PLUS electronics. This delivers the power of corded 1.25 horsepower laminate trimmers and best-in-class 31,000 RPM providing you with power and speed for clean, quality cuts in hard materials. With our M18™ REDLITHIUM™-ION 5.0Ah battery, the cordless laminate trimmer cuts up to 76m of 9.5mm roundovers in red-oak, providing you with all-day run time with fewer trips to the charger. The handheld laminate trimmer is equipped with a micro-adjust dial and macro-adjust button, providing you with fast and accurate depth adjustments for highly accurate work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives you control in all applications. The Laminate Trimmer also features a sturdy 101mm sub-base plate providing you with stability, and dual-LED lights illuminate your work surface. The M18 FUEL™ Laminate Trimmer is compatible with a plunge base and an offset base (sold separately).

WHAT'S INCLUDED

M18 FUEL™ 125mm (5") Angle Grinder with Deadman Paddle Switch (Tool Only)

(2) M18™ REDLITHIUM™-ION 5.0Ah Battery

M12™ & M18™ Rapid Charger

Capable of demolishing 338kg of concrete in 30 minutes with 45 Joules of impact energy

Product Info

• 45 Joules of impact energy

• Grease-packed lubrication system and triple dust seal design ensuring long service life

• Fitted with auto-stop brushes for maximum motor protection

• Capable of demolishing 338kg of concrete in 30 minutes

• Shock absorbing handle and adjustable side handle with soft grip

• Heavy Duty Aluminium Housing Body (AHB)

• Easy to transport wheeled carry case

• Wide range of accessories available: Warratah/Marquee Peg Driver, Earthing Rod Driver, Rammer Plate, Clay spade

Our M18 FUEL™ Compact Band Saw offers a light-weight, balanced design with the cutting capacity of 82.6mm for maximum productivity. The M18 FUEL™ Compact Band Saw utilises POWERSTATE™ Brushless motor and Constant Power Technology to cut at maximum speed. It protects your tool from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM™-ION Battery Technology (not included) provides more run-time through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium-ion battery on the market. REDLINK™ PLUS Intelligence has the most advanced system of cordless power tool electronics, providing you with optimised performance, electronic clutch, and overload protection using total system communication between tool, battery, and charger. The compact band saw features a tool-free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. The band saw also includes a hanging hook for easy storage in-between cuts, variable speed trigger, LED light to illuminate your cutting area, superior cut visibility, and balanced body design.

The MILWAUKEE® M18 FUEL™ Multi-Tool generates fast cuts, the power for demolition, and low full tool vibration. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM, with an aggressive 4.2° oscillation angle to deliver fast cuts. The Multi-Tool also gives users the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, removing grout, or tackling other jobs. Vibration dampening technology delivers low full tool vibration, letting the user make cuts more comfortably, and with less fatigue. REDLINK™ PLUS Intelligence ensures optimal levels of performance, protection, and compatibility between the tool and battery. To allow users to adjust speed to suit the application, the M18 FUEL™ Multi-Tool features a 10-setting Variable Speed Dial, with an additional Auto-Load feature. Auto-Load sees the tool start slowly when making precise cuts, before automatically ramping up to the highest speed once under load. Tool-free blade change makes accessory changes quick and means no misplaced tools and less downtime on the jobsite. An integrated 180° LED light provides users maximum visibility in low-light situations.

The M18 FUEL D-Handle Jigsaw combines power, blade speed and precision, to deliver quality cuts in a wide variety of materials and applications. Equipped with MILWAUKEE’s POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, the M18 FUEL D-Handle Jigsaw provides high blade speed at 3500 strokes per minute, minimising chipping or bucking for clean controlled cuts. With the M18 REDLITHIUM-ION 5.0Ah battery, the saw is capable of cutting up to 35m of 19mm laminated particle board, delivering all-day productivity with less trips to the charger. The M18 FUEL D-Handle Jigsaw features a variable-speed two-finger trigger, toolless blade-change and bevel adjust, and an integrated LED light with on/off blower to maximise cutline visibility

The M18 FUEL™ SAWZALL™ Reciprocating Saw is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The M18 FUEL™ SAWZALL™ delivers fast cuts, as it leverages a POWERSTATE™ Brushless Motor to provide users with 3,000 SPM and 32 mm (1-1/4") stroke length for fast material removal. REDLINK™ PLUS Intelligence ensures maximum performance under stress, as well as protection from overloading, overheating, and over-discharging. The M18™ REDLITHIUM™-ION 5.0Ah Battery Pack (not included) delivers users runtime and provides more work per charge and more work over the life of the battery pack. The M18 FUEL™ SAWZALL™ Reciprocating Saw is designed to perform in demanding applications and is Milwaukee's most durable cordless reciprocating saw yet. A tool-free, wear-resistant blade change reduces downtime on the job, and an anti-corrosion blade clamp and metal reinforced battery rails provide long component life, standing up to tough jobsite conditions. The M18 FUEL™ SAWZALL™ Reciprocating Saw weighs less than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job.

The M18 FUEL 165mm Circular Saw is the fastest saw in its class, offering fast cutting speeds, maximum runtime and longer tool life. The POWERSTATE Brushless Motor outpowers all other 18-Volt cordless circular saws and allows you to perform jobs that previously required a corded tool. The M18 REDLITHIUM-ION 5.0Ah Extended Capacity Battery Pack (not included) delivers maximum runtime and provides more work per charge and more work over the life of the pack. The saw’s REDLINK PLUS Intelligence ensures optimised performance and protection from overloading, overheating and over-discharging. The 18-volt circular saw’s guards and shoe are built of cast magnesium to provide a durable, lightweight base. The saw also features an integrated LED light and a rafter hook for convenient storage on the job. The saw includes a blade wrench and a blade.

The M12™ Stick Transfer Pump delivers maximum filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more. Featuring a 91 cm submersible aluminium barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and hard to reach areas. Equipped with HydroPass filter technology, the 360° filter maximises flow in heavy debris, minimising downtime caused by clogging. Powered by the M12™ battery platform, this water transfer pump eliminates repetitive manual pumping and improves control, requiring only one hand to pump, freeing the other to control the outflow. With a 4.6 metre max head height and an outlet compatible with a standard 19 mm garden hose, this pump delivers the power to push water farther - out of pits and basins, over walls, and to the ideal deposit location. Compatible with all of our M12™ REDLITHIUM Batteries this pump keeps you productive, effortlessly pumping up to 34 Litres per minute and 1,040 Litres when using a M12™ REDLITHIIUM™-ION 4.0 Ah battery pack

The MILWAUKEE M12 Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. With the capability to complete demanding applications like car, LT truck, and compact equipment tyres, the M12 Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, The high efficiency motor and pump top-off car tyres in under 1 minute. The TRUEFILL Auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 66cm hose with an all brass Schrader chuck.

• Durable aluminium gear housing

• Mechanical 2 speed gearing with all metal gear construction

• 60Nm Max lock torque

• XPT technology that protects against dust & moisture

• Twin LED Job light with after-glow function

• Rigid aluminium hammer case

• One touch bit installation

• 170Nm of max fastening torque

• XPT technology that protects against dust & moisture

• Variable speed trigger

• Push button control with on/off and high/medium/low speeds

• Compact design with lower centre of gravity for easier handling

• High orbital speed up to 11,000opm with 2.8mm orbit diameter

• Pad brake prevents aggressive sanding on first contact

• Hook & loop paper fastening system

• Water supply attachment for clean cuts up to 40mm deep

• Automatic Torque Drive increases torque to power through any cut

• Auto-start Wireless System (AWS) compatible*

• XPT technology that protects against dust & moisture

• Electric brake for rapid stopping of blade rotation

*Requires optional wireless transmitter

• Forward Rail Design for smooth precise cutting

• Expandable sub-table for improved stability when cutting long material

• Shadow line projects cut line onto work material

• Dual zone dust extraction ports supress dust scattering of wood chips

• Compatible with AWS* for wireless connectivity with compatible dust extraction

• Auto-start Wireless System (AWS) for on demand dust extraction

• 3 stage HEPA filtration system for 99.97% filtration rate

• Powerful max sealed suction of 11kPa for high efficiency extraction

• Variable suction control dial for optimum suction and runtime

• On board storage for pipes and accessories

On/off switch with safety lock and variable speed, Aluminium base with accurate rack and pinion depth

adjustment  10,000 - 30,000rpm no load speed for a clean professional finish, LED job light for improved

visibility,     Up to 100 Metres of trimming using 6.0Ah Battery* (Trimming 6mm at 4mm deep)

• Two speed settings (11,000/ 14,000 OPM) engineered for a flawless finish

• Ergonomic palm rest grip design for comfortable handling

• 1.5mm orbit diametre for efficient removal of work piece material

• Large clamping lever for quick and easy paper installation

• Dust Box provides efficient through-the-pad dust collection for a cleaner work environment

• Electronic 3 stage speed adjustment for a flawless finish

• 2.0mm orbit diameter for efficient removal of work piece material

• Efficient 200W* motor provides 12,000opm/24,000spm no load speed

• 185 x 92mm pad size with spring loaded paper clamp

• Ergonomic grip design for comfortable use single or double handed

• 4-Pole motor with dual steel bearings delivering high power

• High durability clutch with direct drive transmission

• 4,000rpm no load speed motor delivers fast driving performance

• Tool-less stopper base adjustment

• Sub-Compact design ideal for working in tight spaces and overhead applications

• Vibration absorbing handle moves independently of the motor for increased operator comfort

• Brushless motor delivers 1.2J* of impact energy with a maximum 17mm hole capacity

• 2-Mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications

• Weighs only 2.4kg with battery (battery not included) for reduced operator fatigue 

*Rating in accordance with EPTA 05/2009

• Capable of detecting a variety embedded objects such as; metal, wood, plastic and shielded electrical wire up to 180mm deep

• Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or plaster board) and hollow block

• Simplified user interface displays center, edge position, relative width and depth of embedded objects

• Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally

• Dust and water resistance with IP54 rating for increased durability

• Large capacity of 80mm for polishing and 50mm for sanding

• Compact design for comfortable use in narrow work spaces

• XPT technology enhanced protection against dust & moisture

• 2 speed selection Polishing: 0 - 2800 and Sanding: 0 - 9500

• Elastomer bumper on gear housing for work piece protection

• One-handed compact and lightweight design

• 22mm stroke with a cutting capacity of 255mm in wood

• Faster cutting 3,100spm no load speed

• Two switch levers; trigger switch and paddle switch

• XPT technology that protects against dust and moisture

• Unique rubber joint suppress vibration to battery terminals

• 3 Stage power selection for optimum rpm and fastening torque

• Most powerful in its class with 1,700Nm of nut busting torque

• Twin LED job light with pre glow and after glow function

• Durable hammer case for maximum reliability

• 1/4" hex bit receptacle

• Compact angle head for easy access in tight places

• The head height of 53mm (2-1/16") ensures easy access to screws in tight places

• Conveniently located reverse switch

• Ergonomically designed handle with rubberized soft grip provides more control and comfort

• LED job light with afterglow function

• 136mm TCT saw blade delivering 50.5mm cutting depth

• Self-Dust collecting housing reduces scatter of metal chips

• Makita-built motor delivers 3,600rpm

• Electric brake for fast yet gentle stopping of blade rotation

• LED job light

• 150mm TCT saw blade delivering 57.5mm cutting depth

• Self-Dust collecting housing reduces scatter of metal chips

• High performance cutting with 4,100rpm no load speed

• Automatic Torque Drive increases torque to power through any cut

• Electric brake for fast yet gentle stopping of blade rotation

• Tool-less accessory changes with lever locking system

• Compatible with STARLOCK/ StarlockMax

• Variable speed dial 10,000 - 20,000 OPM no load speed for versatile performance

• 12 angle settings of accessories at every 30° from 0° to 360°

• 2.5m/s² or less of vibration thanks to AVT (Anti-Vibration Technology)

• Small and easy to grip 169mm diametre barrel grip for comfortable and improved handling

• Variable speed control trigger

• Excellent manoeuvrability acheived by the well balance design, allows for easy overhead application

• Base cover protects material from damage

• Dust box is designed to catch dust in overhead application or be connected to dust extraction

• LED joblight

• Kickback detection, anti-restart and soft start

• Automatic Torque Drive increases torque to power through any cut

• Extreme variable speed performance of 3,000 - 8,500rpm no load speed

• XPT technology that protects against dust & moisture

• Auto-start Wireless System (AWS) for on demand dust extraction

• Variable Speed Control Dial (3,000 - 8,500rpm) Enables User to Match the Speed to the Application

• Electronic brake, kickback detection, anti-restart and soft start

• Automatic Torque Drive increases torque to power through any cut

• XPT technology that protects against dust & moisture

• Auto-start Wireless System (AWS) for on demand dust extraction

• 161psi maximum air pressure for inflating a wide variety of equipment

• Large digital backlit display, shows current and target air pressure

• Decompression function for reducing the current air pressure

• High discharge volume at 22L/min for fast inflation times

• Auto-stop function, inflator shuts down once target pressure is achieved

*Duty cycle 10 minutes ON/ 5 minutes OFF

• Convenient trigger operable from two directions

• Flexshaft length 1,200mm

• 12,500 vibrations per minute

• Increased convenience with new trigger operable from two directions

• Battery protection cover

• Cuts up to 13mm (1/2") cement fiber siding

• 360° swivel shear head for increased cutting convenience

• Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting

• Compact and ergonomic design at only 379mm long

• 4-pole motor delivering high power

• Compact 66mm head height

• High performance 1,800rpm no load speed

• Heavy duty keyed chuck design

• Paddle Switch

• Compact and lightweight design at only 434mm in length and 2.9kg skin weight

• Mechanical 2 speed gear box able to drill up to 65mm self feed bits in low speed

• High power brushless motor produces 70Nm max torque in low speed

• High durability 13mm keyed chuck for secure bit retention

• XPT technology that provides increased protection against dust & moisture

• Tool-less blade change for quick and convenient blade changes

• Variable speed control by trigger for more accurate cutting

• 26mm stroke length at 2,600rpm for rapid cutting

• Blower function blows saw dust off the cutting line

• 3 orbital cut settings & straight cutting to suit each specific application

• 26mm stroke with a cutting capacity of 135mm in wood

• Soft No-Load improves your control & battery life

• 800 - 3,500spm no load speed

• Variable speed control via dial

• Tool-less blade change for quick and convenient blade changes

• High brightness with a max. 10,000lm

• Powered by either 18V Li-ion batteries or AC Power

• Increased runtime with 2x 18V terminals, up to 8.5 hours with 2x 6.0Ah batteries

• IP65 rated for protection against dust and moisture *

• 3 stage LED brightness switch

*Only when being used with 18V batteries, not AC power

• Long beam distance lights up objects up to 640 metres away

• 4 output modes; spot light, flood light, spot/flood and strobe

• High brightness neutral white LED's provide a maximum 1,250lm

• Continuous runtime up to 10 hours with a 6.0Ah in spotlight mode

• also available in Olive green as part of the Lifestyle range

• Dual mode: random orbit with forced rotation/ random orbit

• Elastomer bumper on gear housing for work piece protection

• Brushless motor provides 0-6,800opm with a 5.5mm orbit diameter

• Variable speed control via trigger and pre-set dial

• Constant speed control and soft start for smooth operation

• Audio Modes: AM & FM radio frequencies

• High quality sound with 2 large 89mm speakers

• Durable design with an IP65 rating protection against dust and water

• Powered by 40Vmax, 18V, 12Vmax or AC Power

• Runtime up to 27.5 hours with an optional 40V Max 4.0Ah battery (BL4040)

Compatible with 12Vmax CXT, 18V LXT, and 40Vmax XGT batteries (batteries not included)

• 2 Stage power selection for optimum suction performance

• Approved for dust class L of EC regulation

• 7.5L Tank capacity with HEPA filter

• 6.7kPa Max sealed air suction

• Compact and lightweight at 4.6kg with battery

• Up to 35 minutes runtime on high power selection

• 6,400 Ties per charge

• 120 Tiers per Wire Reel

• Ties up to 2 x D16 Rebars

• Tying speed of 0.8 Seconds per tie

• 6 Stages to match various tension strength

• XPT technology that protects against dust & moisture

• For optimal performance use Makita wire cartridges

• High durability aluminium housing for stable cutting up to 66mm

• Constant speed control, blade speed remains constant under heavy load

• Brushless motor provides 192m/min blade speed for rapid cutting speeds

• Variable speed via trigger and dial for controlled cutting in various materials

• Adjustable stopper plate for cutting close to walls and ceilings

• 20mm max cut capacity with 6 pre-set cutting depths

• Angle adjustable fence lockable in any position between 0 and 90

• 6,500rpm no load speed delivers high performance cutting

• Electronic current limiter for overload protection

• Anti-restart function with warning lamp for safety

• Connects directly to Makita extractors VC2510/VC3210

• Maximum blade capacity of 165mm

• 2 settings to optimise viscosity for paint or mortar

• Powerful brushless motor delivers 0-300 or 0-1,300rpm no load speed

• Protective covers to shield the unit, switch and battery from splashes

• XPT technology protects against dust and moisture

• Efficient cooling temperatures between 10°C and -18°C and warming to 60°C

• Powered by a single 40V XGT, 18V LXT battery, 12V car adaptor or AC power

• Runtime of up to 28 hours with 2x BL4050F batteries in cooling at 5°C (normal fridge temperature)

• Highly durable design with IPX4 water resistance and enclosed battery compartment

• 20L capacity allows for storage of approx. 30x cans or 20x 500mL water bottles

• Includes 3/8 and 1/4" socket adaptors

• Can be used as a hand ratchet wrench

• 800rpm producing up to 47.5Nm max fastening torque

• Ability to tighten 13mm nut by removing socket adaptor

• Ergonomic design and Ultra-lightweight at just 0.86kg skin

• Instant start- ready when you are!

• High efficiency brushless motor provides power equivalent to a 32cc petrol chainsaw

• Variable speed trigger

• Chain Speed of 1,200m/min

• Adjustable chain oiling

• Metal spike and kickback brake provide additional safety and control

• Orange High Visibility variation available

• 480mm - 18" heavy duty metal deck

• 2 tooth bar blade

• Provides instant full speed of 3,300rpm

• Quiet mode reduces noise through constant speed control

• 60L catcher

• Variable speed trigger with cruise control function

• Powerful 187.6km/h air speed

• 13m3/min air volume/ 459 CFM

• Lightweight at 3.0kg with battery

• Protection against dust and moisture XPT technology

• 5L tank with ergonomic design for user comfort

• Dual action head allows for selection between mist or jet nozzle

• Up to 8hrs runtime on a 6.0Ah battery*

• Extendable spray lance with lock on lever

• Lightweight design at 3kg with a battery (dry weight)

  *Results may vary

• High power in a compact design with 1,100Nm nut busting torque

• 40Vmax XGT battery continues to perform in continuous heavy duty application

• Optimised application selector with 6 modes adapting speed and impacts for each task

• Full speed mode shortens the distance of trigger travel required to hit full speed

• 4 Stage power selection for optimum rpm and fastening torque

• High powered brushless motor allows for a massive 4mm maximum cutting depth

• Auto-start Wireless System (AWS) for on demand dust extraction*

• 15,000rpm no load speed for rapid cutting speeds

• Left or right-side chip ejection

• Electric brake & foot on base plate protect workpiece from damage

*AWS receiver sold separately

• Compatible with optional guide rail system for ultra precise straight cutting

• Constant speed control maintains cutting speed under heavy load

• Electric blade brake and soft start improve safety during use

• Dual front and rear bevel lock provide additional rigidity for accurate bevel cuts

• Compatible with AWS for wireless connectivity with compatible dust extraction

*AWS Wireless adaptor comes as standard

• Heavy duty power cutting 40% faster than the 18V equivalent model

• High durability with advanced protection against heat and dust

• Active Feedback Technology sensors shut down the tool in the event of a kickback

• Enhanced safety features including an electric brake, soft start and anti-restart

• Improved heat dissipation capacity allows for continuous heavy duty use

• Heavy duty power 2.8J** of impact force

• Anti-vibration technology provides extremely low vibration of 7.0m/s²

• Active Feedback Technology - sensors shut down the tool in the event of a kickback

• Compatible with AWS for wireless connectivity with compatible dust extraction

• Dust management compatible with multiple options for various environments

*AWS receiver sold separately

*Rating in accordance with EPTA 05/2009

• Heavy duty power 3.9J** of impact force

• Anti-vibration technology provides extremely low vibration

• Active Feedback Technology - sensors shut down the tool in the event of a kickback

• Compatible with AWS* for wireless connectivity with compatible dust extraction

• Dust management compatible with multiple options for various environments

*Rating in accordance with EPTA 05/2009

*Requires optional wireless transmitter

• Heavy duty power hitting at 8.0J^ of impact energy

• Active Feedback Technology - sensors shut down the tool in the event of a kickback

• Anti-vibration technology provides extremely low vibration of 5.0m/s²

• Soft no load function reduces speed and vibration when under no load for improved comfort

• Compatible with AWS* for wireless connectivity with compatible dust extraction

*^Rating in accordance with EPTA 05/2009

*Requires optional wireless transmitter

• Active feed-back sensors, shuts down the tool in the event of kickback

• Advanced safety protection with the electric brake and extremely low vibration of only 2.0m/s²

• Massive maximum cutting depth of 127mm at a rapid 5,300rpm

• Water resistance of IPX4 for increased protection against moisture ingress

• Water supply adaptor for water suppression during masonry cuts

*Cutting wheel not included

*BL4080F/ BL4050F/ BL4040 Recommended

• Guide rail compatible saw base adapts with optional guide rails to provide perfectly straight cut

• Heavy duty power with rapid cutting speeds at 6,000rpm

• Safety protection with electric brake and soft start for user safety

• Innovative technology with automatic torque drive optimising cutting speed & torque

• Compatible with AWS* for wireless connectivity with compatible dust extraction

*AWS Receiver sold separately

• Heavy duty power 3,500rpm with constant speed control maintaining blade speed under load

• Max cutting capacity 101mm and Max bevel capacity 60°

• Safety protection with electric brake and soft start for user safety

• Compatible with AWS* for wireless connectivity with compatible dust extraction

• Guide rail compatible saw base adapts with optional guide rails to provide perfectly straight cut

*AWS Receiver sold separately

• Heavy duty power with 2,050Nm nut busting torque

• 4 Stage power selection for optimum rpm and fastening torque

• High durability construction with battery vibration suppression protecting the battery

• Optimised application selector with 6 modes adapting speed and impacts for each task

• Full speed mode shortens the distance of trigger travel required to hit full speedHeavy duty power with 2,050Nm nut busting torque

• Heavy duty power cutting 40% faster than the 18V equivalent model

• High durability with advanced protection against heat and dust

• Active Feedback Technology sensors shut down the tool in the event of a kickback

• Enhanced safety features including an electric brake, soft start and anti-restart

• Improved heat dissipation capacity allows for continuous heavy duty use

• Heavy duty power with 141Nm peak torque

• Active Feedback Technology - sensors shut down the tool in the event of a kickback

• Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity

• 35% faster drilling speed compared with the equivalent 18V model

• Electronic clutch for selecting between 41 torque range settings

• Heavy duty power with 220Nm max. torque

• Precision fastening with enhanced anvil stability for less bit wobble

• Optimised application selector with 6 modes adapting speed and impacts for each task

• Single hand quick change trigger allows user to change between speeds and modes at the touch of a button

• Constant speed control allows tool to operate at the same speed regardless of battery capacity

• High performance cutting speeds up to 35% faster than the equivalent 18Vx2 model

• Massive cutting capacity with the ability to cut wood up to 255mm wide

• High durability construction with battery vibration suppression protecting the battery

• Blade ejection lever for convenient removal without having to touch the blade

• Electric speed selector, high speed for wood cutting & low speed for metal cutting

• Up to 60% faster cutting than the 18V LXT equivalent

• Constant speed control and soft start for performance and control

• 10,000 - 31,000rpm no load speed for a clean professional finish

• Aluminium base compatible with a variety of optional trimmer bases

• Compatible with AWS* for wireless connectivity with compatible dust extraction

*Requires optional wireless transmitter

• High brightness with a max.10,000lm

• Powered 40Vmax XGT or 18V LXT Batteries

• High durability IP65 rated for protection against water and dust

• Runtime of up to 2.4 hours in High when powered by optional (2x 4.0Ah BL4040)

• Head pivots 240° for optimal light angle direction

• Massive drilling capacity with up to 159mm hole saw capacity

• Automatic Torque Drive increases torque to power through any task

• 136Nm of max torque with a torque limiter reducing kickback if the bit binds

• High durability 13mm keyed chuck for secure bit retention

• 2 speed mechanical clutch for high speed and high torque applications

Replacement socket for start/stop set CordlessControl, type I (order no. 630235000)

WHAT'S INCLUDED

M18 FUEL™ ONE-KEY™ 3/4" High Torque Impact Wrench with Friction Ring (Tool Only)

M18™ Cordless 2-Speed Grease Gun (Tool Only)(2)

M18™ REDLITHIUM™-ION 5.0Ah Battery

M12™ & M18™ Rapid Charger

• Temperature control dial with a maximum temperature of 550°C

• 2 stage Air volume settings, High producing 200L/min and low 120L/min

• Lock on trigger switch for easy hands-free operation

• Quick release nozzles, eject hot nozzles without the need to handle hot parts

• Standard nozzles: Glass Protection, Wide Slot, Reflector, and Reduction Nozzles

The MILWAUKEE M18 Jobsite Radio/Charger is the first charging radio to bring the power of Bluetooth to the jobsite, while delivering the industry's best reception and sound.  The most advanced radio of its kind, the M18 Jobsite Radio/Charger features a Bluetooth receiver so you can stream rich, full sound wirelessly from over 30m.  It's unique battery charger allows you to charge any M18 battery without sacrificing reception or sound quality.  For added versatility, a high-power USB port allows you to charge most portable electronic devices. The M18 Radio/Charger's lightweight, high-strength design includes a reinforced roll cage for protection from weather and abusive jobsite conditions.  The radio/charger also offers the industry's largest on-board, weather-sealed storage compartment to protect your small belongings and smart phones.  A 406mm auxiliary input cord and 2 x AAA batteries are included.

The M12 Soldering Iron delivers fast application speeds by reaching operational temperature in under 18 seconds and maintaining an optimised temperature throughout the most demanding applications. The heat indicator utilises REDLINK INTELLIGENCE to notify users when the tool is ready-to-use and safe-to-store, eliminating the guesswork. The 3-stop pivoting head provides unmatched access by allowing users the ability to adapt the tool for the application and solder in more confined spaces. The M12 Soldering Iron powered by REDLITHIUM-ION battery technology delivers up to 45 minutes of run-time on a M12 2.0Ah Battery Pack.

The M18 125mm Random Orbital Sander delivers corded power with 12,000 Max OPM output. The 7,000-12,000 OPM variable speed dial allows the user more control over the output of the tool to match the orbit speed for the application. The tool’s powerful motor allows the user to remove more material per battery charge. The M18™ Random Orbital Sander, powered by REDLITHIUM™-ION battery technology, delivers up to 60 minutes of runtime on a M18™ 5.0Ah Battery.

The M18 FUEL™ 28mm SDS Plus Rotary Hammer with ONE-KEY™ delivers fast drilling, hard hitting performance and maximum control for productivity on the jobsite. Designed to achieve top performance with only moderate pressure, the rotary hammer is compatible with all M18™ REDLITHIUM™-ION batteries, and is optimised for use with M18™ REDLITHIUM™-ION HIGH OUTPUT™ 8.0Ah batteries (sold separately). The POWERSTATE™ Brushless Motor delivers users 4.9 J of impact energy, 800 RPM, and 4,600 BPM, providing speed and power in the most demanding applications. REDLINK™ PLUS Intelligence tool technology ensures maximum rotary drill performance and protects the tool from overload, overheating, and over-discharge. The MILWAUKEE® M18 FUEL™ 28mm SDS Plus Rotary Hammer with ONE-KEY™ includes AUTOSTOP™ Kickback Control for maximum control and enhanced safety, with the tool sensing a bind-up situation when users are drilling in rebar or hard aggregate and stopping over-rotation, without the need for the user to release the trigger, indicated by the AUTOSTOP™ Indicator LED. The Anti-Vibration System (AVS) minimises vibration for maximum comfort when in use for extended periods. A Dedicated Dust Extractor (M18FDEX) is also available (sold separately), which once connected is powered by the Rotary Hammer. With ONE-KEY™ technology, users also gain the ability to customise, track and manage the tool.

The cordless caulk and adhesive gun offers the most bead control. Deliver caulk or adhesives smoothly and steadily, even with the highest viscosity materials, with the incredible pushing force of the M18 Cordless 310ml Caulk and Adhesive Gun. All-metal gears provide 4500Nm of force, and CFT Constant Flow Technology eliminates motor oscillation for steady dispensing and even beads at all viscosity levels. A variable-speed trigger and six-setting maximum speed dial optimise the tool’s 0-212.54CMPM flow rate. The exclusive MILWAUKEE anti-drip mechanism prevents oozing of excess material when the trigger is released. A rotating collar gives you maximum bead control around turns, and the quick-change carriage design lets you change between 310ml and sausage-style containers. The M18 REDLITHIUM Battery (sold separately) lets you dispense more than 200 310ml tubes of construction adhesive on one charge. The gun comes with a 310ml carriage, 310ml plunger rod and piston assembly.

For use with M18 cordless caulk and adhesive guns. The 600mm aluminium barrel sausage style conversion kit accepts all standard 600mm sausage style material packages.

The M18 FUEL 135mm-150mm (5-3/8" – 5-7/8") Metal Saw delivers the fastest cuts with the longest tool life and up to 370 cuts in 19mm (¾") EMT. This compact and lightweight metal cutting saw utilises a POWERSTATE Brushless Motor with 3,900 RPMs to deliver the fastest cutting speeds and longest tool life on the market. The metal saw also features REDLINK PLUS Intelligence, the most advanced system of cordless power tool electronics, for maximum performance and unmatched durability. The M18 REDLITHIUM-ION 5.0Ah Battery Pack delivers up to 370 cuts in 19mm (¾”) EMT which is 1 cut per minute for over 6 hours straight. The MILWAUKEE M18 FUEL 135mm-150mm (5-3/8" – 5-7/8”) Metal Saw features a compact, low-profile design for easy handling and increased control. At only 2.2kg, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The new saw offers an integrated hang hook that allows for easy storage while the tool is not in use. The extra-large cut guide, impact resistant window and LED light ensure superior line of site and the stainless steel shoe reduces chip build-up to prevent surface marring. The M18 FUEL Metal Saw features a 30T Carbide-Tipped Metal Saw Blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials. Backed by the MILWAUKEE 5-year warranty, the M18FMCS-0 comes equipped with a 30T 135mm (5-3/8") METAL TECH Carbide-Tipped Metal Saw Blade and Blade Wrench.

Designed for the carpenter, remodeler and general contractor, the M18 FUEL 184mm Circular Saw from MILWAUKEE generates corded power, cuts faster and gives users up to 750 cuts per charge. The POWERSTATE Brushless Motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM-ION HIGH OUTPUT 12.0 battery delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.

WHAT'S INCLUDED

M12™ Rivet Tool (Tool Only)

M12™ Lithium-ion Battery Charger

M12™ REDLITHIUM™-ION 4.0Ah Battery

M12™ 152mm (6") Rivet Extended Outer Jaw Housing

M12™ Rivet Nose Pieces

The M12 FUEL™ Bandfile 10mm is a cordless bandfile that delivers pneumatic performance, size, and features for professional automotive, industrial, and metalworking users. The MILWAUKEE® Bandfile delivers fast spot weld removal by leveraging the POWERSTATE™ Brushless Motor Technology. The cordless bandfile offers maximum control with two-speed settings for precision tasks and larger material removal requirements. The Forward/Reverse function and variable speed trigger offers maximum control in tight spaces. The Lock-on button assists with reducing user fatigue when required to performs larger material removal tasks over extended periods. The Milwaukee M12 FUEL Bandfile has a Tool-Free 360⁰ Arm Rotation, providing optimal mobility & access.

A traditional D-Handled configuration drill, the D13 is decades old, and still has a place in many workshops and vans. High Torque, slow speed, and plenty of ways to hang on to it.

Three position removable side handle, and rear D-Handle can be locked vertically, horizontally, or removed all together for access into tight spaces.

A legend in its own lifetime, the D13VG is the perfect drill for electricians or plumbers who need to drill large holes for wiring or plumbing. Unbelievable torque from such a compact drill, this unit is famous for being able to get into the tightest of spaces and getting those BIG holes done.

2300W motor with high overload durability with super tough AHB alloy outer casing with double-insulated polycarbonate inner layer

Heat resistant, super high powered 1400W motor with sleek, low profile head

High Performance Worksite Table Saw with huge cutting capacity. Includes wheeled stand with foldout legs for easy transportation from site to site.

• Patented adjustable "Duo" oscillating circuit setting: Can be set depending on the application for fine sanding or high stock removal

• Variospeed (V) Electronics for working at customised speeds to suit various application materials

• Thumbwheel for speed preselection

• Turbo boost: allows additional power reserves to be employed for maximum removal

• Power Control System: No scratches when placing the machine directly onto the material at speed

• Grip area with non-slip soft-grip surface

• Removable side handle

• Dust-proof ball bearings for long service life of the machine

• Sturdy aluminium die cast bearing housing

• Easy to empty textile dust bag for working without extraction facilities

• Extraction possibility by means of connecting an all-purpose vacuum cleaner

• Multi-hole sanding pad for effective extraction and a longer service life of the sanding medium

WHAT'S INCLUDED

M18 FUEL™ 165mm Track Saw (Tool Only)

M18™ REDLITHIUM™-ION HIGH OUTPUT™ 6.0Ah Battery

M12™ & M18™ Rapid Charger

Constant speed control maintains cutting speed under load

Tool-less blade change for quick and convenient blade changes

Compact and lightweight design for enhanced maneuverability

3 orbital settings plus straight cutting deliver faster and more accurate cuts in a variety of materials

Variable control dial enables user to match the speed to the application

WHAT'S INCLUDED

M18 FUEL™ 1/2" Mid-Torque Impact Wrench with Friction Ring (Tool Only)

M18 FUEL™ 125mm (5") Angle Grinder with Deadman Paddle Switch (Tool Only)

M12 FUEL™ 3/8" Impact Ratchet (Tool Only)

SHOCKWAVE™ 1/2" Drive 14PC Metric Deep 6 Point Impact Socket Set

(2) M18™ REDLITHIUM™-ION 5.0Ah Battery

M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah Compact Battery

M12™ & M18™ Rapid Charger

The M18 7.5L Wet/Dry Vacuum offers powerful suction for wet and dry applications. Compatible on all MILWAUKEE M18 REDLITHIUM-ION battery packs, the M18WDV-0 offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A HEPA filter delivers excellent fine dust collection for dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 31.8mm inlet allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, hose clip adapter and a wide nozzle.

Light and handy machine for convenient one-hand operation

Very good weight/performance ratio for low-fatigue working

Grip area with non-slip soft-grip surface

Dust-proof ball bearings for long service life of the machine

Dust collector cartridge with filter for working without connecting to a vacuum cleaner

Extraction possibility by means of connecting to an all-purpose vacuum cleaner via an adapter (accessory)

Triangular base plate for sanding edges, corners and surfaces

Light and handy machine for convenient one-handed operation

Very good weight/performance ratio for low-fatigue working

Grip area with non-slip soft-grip surface

Dust cartridge with filter for working without connecting to a vacuum cleaner

Extraction possibility by means of connecting to an all-purpose vacuum cleaner via an adapter (accessory)

The M18 FUEL™ 1/4" Braking Die Grinder with Slide Switch delivers corded performance allowing users to remove up to 305mm of weld bead per charge on a M18B5. Equipped with RAPIDSTOP™ technology that provides braking in under 2 seconds, the M18 FUEL™ 1/4" Braking Die Grinder with Slide Switch enhances safety while maximising productivity. The POWERSTATE™ brushless motor delivers 27,000 RPM and maximum power to allow users to maintain grinding power while in the tight spaces. The cordless braking die grinder has up to 55mm accessory compatibility for surface prep applications and material removal while featuring REDLINK PLUS™ Intelligence, an advanced system of cordless power tool electronics, for maximum performance and tool life.

The M18 Cordless 2-Speed Grease Gun delivers maximum pressure and unmatched versatility. It offers an industry leading 10,000 PSI max operating pressure and a patent pending pre-set grease counter, that allows service and maintenance professionals to dispense precise amounts of grease. The tool’s 2-speed design offers users the ability to select between max pressure and max flow rate. Other unique features include an on-board LED light, a lock-on/lock-off trigger, and a plunger rod with markings to gauge how much grease is left in the barrel.  The tool’s stand up design and shoulder strap capability offer user convenience, while limiting fatigue and the 1.2m flexible hose offers greater accessibility when greasing hard to reach fittings. The new tool is also compatible with a clear barrel accessory.  Powered by an M18 REDLITHIUM-ION Battery pack, this is the industry’s only 18V grease gun that’s battery is compatible with a system of tools.

The M18 FUEL™ HOLE HAWG™ Right Angle Drill from MILWAUKEE™ drills faster than the original HOLE HAWG™, delivers over 220 holes per charge on a M18HB6, and is lighter weight than its corded predecessor. Optimised for many applications, the M18 FUEL™ HOLE HAWG™ Right Angle Drill delivers game-changing productivity for professionals drilling with augers up to 32mm and self-feed bits up to 50mm. The POWERSTATE™ brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM™-ION battery packs provide maximum run time and recharges than standard lithium, operate down to -18C. and have a battery fuel gauge to display the remaining charge.

The M12 FUEL™ Bandfile 13mm is a cordless bandfile that delivers pneumatic performance, size, and features for professional automotive, industrial, and metalworking users. The MILWAUKEE® Bandfile delivers fast spot weld removal by leveraging the POWERSTATE™ Brushless Motor Technology. The cordless bandfile offers maximum control with two-speed settings for precision tasks and larger material removal requirements. The Forward/Reverse function and variable speed trigger offers maximum control in tight spaces. The Lock-on button assists with reducing user fatigue when required to performs larger material removal tasks over extended periods. The Milwaukee M12 FUEL Bandfile has a Tool-Free 360⁰ Arm Rotation, providing optimal mobility & access.

Designed for the professional carpenter and remodeler, the MILWAUKEE® M18 FUEL™ 1/2" Router delivers best-in-class cordless performance with 2.25 peak horsepower, control and comfort in application, and 68 linear metres of runtime per charge. The POWERSTATE™ Brushless Motor delivers less bog down under load for clean, precise cuts and increased productivity. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The ergonomic BODYGRIP® and overmould pommels provide control and comfort in application to enhance precision and reduce fatigue. The M18™ REDLITHIUM-ION HIGH OUTPUT 6.0Ah Battery (not included) provides 68 linear metres per charge of 15.88mm roundover in pine and the power to tackle the toughest applications found on the jobsite. The variable speed dial has an adjustment range from 12,000 to 25,000 RPM to optimise cuts across a wide range of bits and materials. The router is equipped with a micro-adjust knob and macro-adjust button with over 50.8mm (2") of travel to provide users with fast and accurate depth adjustments. The cordless router features dual-LED lights to illuminate the work surface, a spindle lock for quick one-wrench bit changes, and a modular console design for compatibility with the Milwaukee® 1/2" Router Plunge Base (RBA1) (not included).

The M18 FUEL w/ ONE-KEY High Torque 3/4” Impact Wrench with Friction Ring provides the maximum power, minimum length, and maximum repeatability! The POWERSTATE Brushless motor delivers up to 1627Nm of fastening torque and 2034Nm of nut-busting torque, providing users a cordless solution that will eliminate the need for corded Impact Wrenches. The industry’s most compact cordless High Torque Impact wrench at 218mm in length, this tool allows for more access in tight spaces. REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM-ION batteries deliver more work per charge and more work over the life of the battery.Compatible with ONE-KEY, this is the industry’s first High Torque Impact Wrench that wirelessly connects to a smart phone to customise, track and manage a tool’s performance and location. Unlimited Tool Customisation allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEY, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time. Integrated tool tracking, also available through ONE-KEY, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY compatible devices within the 30.5m range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. If you’re having trouble locating a lost tool, expand your search with the help of anybody with the ONE-KEY app. By opting in, when any phone with the app comes within 30.5m of your tool, you will receive an updated location. Paired with tracking, Integrated Tool Security provides the ultimate theft protection. Protect your investment with features like tool lock-out, or hide tool from the nearby devices screen so only you can see your tool is in range. If your tool is lost or stolen, render it useless by sending a remote command to the tool to shut itself off the next time it comes within range of any ONE-KEY app.

The M18 82mm Planer delivers unmatched depth control & powerful stock removal for quick and precise material removal on soft or hard woods. The Planer’s powerful motor allows the user to remove up to 2mm in a single pass for increased productivity. The depth adjustment dial’s 20 locking positions allows for multiple depth settings and precise depth control. In addition the depth adjustment dial does not rotate past the 0 or 2mm setting which allows users to quickly identify at what depth they are cutting without needing to re-zero the dial. The M18 Planer also provides up to a 10.7mm rebate cut capacity offering users more depth of cut when making shiplap joints. A left or right chip ejection feature allows users to aim shavings away from their eyes or finished surfaces; increasing safety, productivity, and accuracy.

40Vmax XGT Brushless 2.5Ah Impact Driver/ Hammer Drill driver Kit includes:

HP001GZ 40Vmax XGT Brushless Hammer Drill Driver and TD003GZ 40Vmax XGT Brushless Impact Driver breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal

• HP001G 40Vmax XGT Brushless Hammer Driver Drill

Makita-built brushless motor delivers with 141Nm peak torque 2 speed settings (0-650 & 0-2,600rpm) (0-9,750 & 0-39,000IPM)

• TD003G 40Vmax XGT Brushless Impact Driver

Makita-built brushless motor delivers 210Nm max. torque 4 speed settings (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700rpm & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,400IPM)

INCLUDES : 2 x 40 max XGT 2.5Ah batteries, charger, tool bag

PACKOUT TRAY 48228045

PACKOUT LARGE TOOLBOX 48228425

PACKOUT ROLLEING TOOLBOX 48228426

PACKOUT TOOLBOX 48228424

PACKOUT LARGE TOOLBOX 48228425

PACKOUT ROLLING TOOLBOX 48228426

PACKOUT CRATE 48228440

PACKOUT COPMACT OTGANISER X 2 48228435

PACKOUT LARGE TOOLBOX 48228425

PACKOUT ROLLING TOOLBOX 48228426

LXT 2pc 18V 6.0Ah Brushless Hammer Drill Driver/ Impact Driver Kit includes:

• DHP486 Brushless Cordless Hammer Drill Driver

• DTD171 Brushless Cordless Impact Driver

BONUS 6AH BATTERY FOR APRIL/MAY 2023

Rotational laser for horizontal and vertical application with manual dual slope

• Versatile - Horizontal and vertical manual dual slope function enable change in grade in two-axis application

• Flexible - Variable-speed and Scan-angle selection allow optimum usability at different lighting conditions

• Robust - IP 56 rated to protect against dust and water for tough jobsite conditions, with shock-warning function to alert error due to vibration

Highest-precision sawing: mitre saw with Bosch´s patented glide arm design

• Innovative, maintenance-free glide arm is extremely robust for precision that lasts

• Glide arm´s hinge design makes the mitre saw compact from front to back

• Double line laser and top-quality saw blade ensure highly accurate cuts

Versatile performance table saw

Powerful motor and Constant Speed feature produce the best results even in toughest applications

Integrated slide carriage, table-widener, and table extension enable expansion for workpieces in a variety of sizes

Tool-free lowering of riving knife enables quick adjustments for creating concealed cuts

Portable professional performance table saw

Compact design and multiple grip areas for easy and convenient transportation

Powerful 1,800 W motor delivers fast work progress

Tool-free lowering of riving knife enables quick adjustments for creating concealed cuts

HP001GZ 40Vmax XGT Brushless Hammer Driver Drill

TD003GZ 40Vmax XGT Brushless Impact Driver

HS012GZ 40Vmax XGT Brushless 165mm (6- ½") Circular Saw

GA013GZ 40Vmax XGT Brushless 125mm (5") Paddle switch Angle Grinder

JR001GZ 40Vmax XGT Brushless Recipro Saw

AS001GZ 40Vmax XGT Brushless Dust Blower